How much does concrete driveway resurfacing cost in Miramichi NB?

Concrete driveway resurfacing in Miramichi, NB typically costs $3 to $7 per square foot, putting a standard two-car driveway (400 to 600 square feet) in the $1,200 to $4,200 range depending on the product used, the condition of the existing concrete, and how much preparation is required.

Resurfacing means applying a thin bonded overlay — typically 1/4 to 3/8 of an inch thick — of a cement-based resurfacing compound over your existing concrete surface. It refreshes the appearance, fills minor surface defects, and can provide another decade or more of service life when the underlying concrete is structurally sound. Products like Quikrete Concrete Resurfacer or similar polymer-modified mixes bond to properly prepared existing concrete.

The critical word is "structurally sound." Resurfacing is cosmetic and surface-level. It cannot fix a driveway that is cracking from below, heaving from frost, settling because the base has failed, or deteriorating due to delamination. If your Miramichi driveway has deep cracks, sections that move when you step on them, areas that have sunk or heaved, or widespread scaling that goes deeper than the surface paste, resurfacing will not last. Those overlays will delaminate and fail within one to three seasons in Miramichi's climate — you will have spent $1,500 to $3,000 and still need a full replacement.

Miramichi's climate deserves specific mention here. The Miramichi River valley experiences significant freeze-thaw cycling, and the combination of cold winters and spring flooding conditions means concrete is under constant stress. Resurfacing over a compromised base in this climate typically ends in disappointment. If the original concrete was not air-entrained (common in older Miramichi driveways from the 1980s and 1990s), the scaling and spalling you are seeing may be fundamental to the slab — resurfacing will just delay the inevitable.

Surface preparation is everything with resurfacing. The existing concrete must be pressure washed thoroughly, all loose material removed, cracks repaired with flexible filler, and the surface mechanically profiled (usually by pressure washing with a surface cleaner or light grinding) to give the overlay something to bond to. Skimping on prep is the number one reason resurfacing jobs fail prematurely.

For Miramichi specifically, get a contractor to assess whether your driveway is a resurfacing candidate or a replacement candidate before you spend money on a product that will not hold. New Brunswick Concrete can connect you with concrete professionals in the Miramichi area who can give you an honest assessment and a quote for whichever approach makes sense.